Ds4 Xbox
360 Driver For Ds4
360 Driver For Ds4
Ds4windows
Use Ps4 Controller On Windows 10

Jays2Kings' DS4Windows IS NOT SUPPORTED!

If you just search 'DS4Windows' on Google/Bing/whatever the first result will probably be the obsolete Jays2Kings' version

Click on ‘Install the DS4 Driver’ to allow you to use the PS4 DualShock controller in Windows 8, Windows 8.1, and Windows 10. If you use Windows 7 or older, you will also have to click on ‘Install 360 Driver.’. Connect the PS4 DualShock controller with your PC by using a USB cable or Bluetooth.
Launch DS4Windows. If not in Program Files, choose where you want to save profiles. A windows will pop up showing how to install the driver, if not, go to settings and click 'Controller/Driver Setup'. If you have used SCP's tool in the past, you may need to uninstall the drivers to use the DS4 with bluetooth.
This is very important, in order to get things running smoothly. First, you have to install the DS4 Driver. If you already have installed DS4 Tool, then you do not have to install it once again. After that, you can install the Xbox 360 driver. If you already have installed a 360 controller you can skip this step.

#2: Install the Xbox 360 Controller Driver on Windows. Now you need to have physically connected your PS4 controller with PC. It’s time to install Xbox 360 controller driver. Download Xbox 360 controller driver for Windows Restart your Windows 10 PC. #3: Use a third-party Xbox Controller Emulator.

In DS4Windows HID Device Mode, the controller appears as a custom device that can only be detected by Ryochan7's DS4Windows, allowing the user to then emulate a DualShock 4 or Xbox 360 (XInput) controller as well as make use of most of its features.

What does work

Xbox 360 (XInput) / DualShock 4 emulation according to the selected profile settings in DS4Windows
Rumble works as normal
DS4's Touchpad Button can be used by remapping a button to it (e.g.: use Select as the TP button instead of Share)
DS3's LEDs can be controlled by setting the correct Light Bar colors (more on that on a later section)
DS4Windows's Flash Lightbar at High Latency function makes the LEDs flash accordingly
Basically every other DS4Windows function that is not related to the Light Bar or motion works as intended

What does not work

DS3 controllers are always recognized as if they were connected by USB. As such, DS4Windows Bluetooth functions like auto-disconnect on idle and disconnect on button combo are not supported. This is a limitation on DsHidMini side and can't be fixed by DS4Windows. The built-in equivalent functions of DsHidMini should be used instead
Motion/UDP server is not supported and will remain so until someone manages to translate the motion info from the DS3 to the DS4 motion standard
Settings that make the Light Bar color flash, pulse or change randomly (rainbow mode) are not supported
Specific DS4 touchpad movements are not supported, only the Touchpad Button (another button needs to be remapped to it)

Using the controller with DS4Windows

To start, the controller must be in DS4Windows mode
Download the latest Ryochan7's DS4Windows release package according to your Windows 10 version
Extract the package to an easily accessible folder
Run DS4Windows.exe
Install the ViGEmBus Driver if asked to

After that, the controller should be properly recognized by DS4Windows. If it's not, verify again if it is in 'DS4Windows mode'.

What now?

From here, DS4Windows can be used mostly as usual. XInput and DS4 emulation, as well other functions, can then be set-up in the profiles settings according to the user needs. Besides that:

Keep in mind: Select and Start buttons are recognized as the Share and Options buttons in DS4Windows
In case you need, there are more detailed instructions on how to change to DS4 emulation
If you want your controller's LEDs to represent the current battery level, see Simple Led Control -> Example 2
If you want the current selected profile to be represented by a specific LED or LED combination on the controller, read the Light Bar to LEDs translation section
It's recommended you have a quick look at the DS4Windows Frequently Asked Questions section, read at least the title of the topics

Light Bar color to LEDs translation

Optional section

Read this section if you want to control your controller's LEDs to show the current battery or selected profile

By setting the correct Light Bar color values in the profile settings it is possible to control the LEDs on the DS3, which can be useful to:

Make the controller's LEDs represent the current battery level
Represent the current selected profile as a specific LED
Indicate the battery level by using Special Actions in the profile's settings

Beware that functions in DS4Windows that make the Light Bar flash, pulse or randomize the colors (rainbow mode) are not supported and can make the LEDs change to an undesired state, though the Flash Light Bar at High Latency function do is supported and will make the LEDs flash at a high frequency.

Simple LED control

Simple to set-up
Good to represent which profile is active (see example 1)
Necessary when making DS4Windows show the controller's battery level and for battery related Special Actions (see examples 2 and 3 respectively)

When this form of translation is active, the Red color value will be translated to the LEDs state according to the following table:

RED value (Dec)	LED state
0 - 64	Blinking LED 1
65 - 94	LED 1
95 - 148	LED 2
149 - 201	LED 3
202 - 255	LED 4

How to unlock itel it2160 password. FORMS OF ACTIVATION:

Simple LED control mode	How to activate	Description
Single mode	Green and Blue = 0	Only the chosen LED is ON
Filling Mode	Green = 0, Blue = 255	The chosen LED and the ones before it are ON

e.g. 1: Setting up a profile to be represented as LED 3 only (single mode).

e.g. 2: Setting up a profile to reflect the controller's battery level.

e.g. 3: Setting up a Special Action to make the LEDs reflect the controller's battery level.

Complete LED control

'Harder' to set-up (not really)
Allows any combination of LEDs on
Useful if the user wants to differentiate between more than 4 profiles

HOW TO ACTIVATE: Green and Blue = 255

When this form of translation is active, the Red color value from 0 to 15 will be translated to the LEDs state according to the following table:

<

LED 4	LED 3	LED 2	LED 1
0
ON	1
ON	2
ON	ON	3
ON	4
ON	ON	5
ON	ON	6
ON	ON	ON	7
ON	8

360 Driver For Ds4